• 01276 855 847 Nationwide (UK)
  • info@bmscontrols.co.uk Email Us
  • Unit C1D, Fairoaks Airport Surrey, GU24 8HX

BMS Controls FAQ

How To Reset Lithium Bms?

How To Reset Lithium Bms?

Are you tired of dealing with a lithium battery that’s not performing as it should? Do you want to know how to reset your lithium BMS and get your battery back in tip-top shape? Well, look no further! In this post, we’ll show you exactly how to reset the BMS on your lithium battery so that it performs like new. So grab a cup of coffee and let’s dive into the world of resetting your lithium BMS!

What is a lithium battery?

Lithium batteries store a large amount of energy and can be reset or “cycled” to restore power. Cycling a lithium battery involves discharging it to roughly 25% of its capacity, then recharging it to 100% to ensure the battery has enough power.

How do lithium batteries work?

Lithium ion batteries work by using an electrochemical reaction between lithium ions and oxygen from the air. The lithium ions are stored in small packs called cells. When you want to use the battery, you open the battery up and allow the electrons to flow. This creates a negative charge on one side of the cell and a positive charge on the other side.

The two charges attract each other, and when they’re strong enough, they break free from their atoms and create a current. That’s how your phone or laptop can start up again when it goes blank – by borrowing power from the battery.

How to reset a lithium battery

If you notice your lithium battery is not holding a charge as well as it used to, it may be time to reset it. To reset a lithium battery, perform the following steps: Turn off your device. Unplug the device from the power source. Remove the battery. Hold down the power button for at least 20 seconds until the device powers off. Reconnect the battery and plug in your device. Turn on your device and check to see if it holds a charge.

What are the benefits of resetting a lithium battery?

If you’re having trouble starting your car, there’s a good chance it’s because of a weak battery. A weak battery can be caused by a number of things, from age to neglect. If you’re not sure if your battery is weak, try the following steps:

1. Pull the key out of the ignition and wait 10 seconds
2. Push the car into gear and hold it for two seconds
3. Release the gear and wait 10 seconds
4. Start the car and check to see if it starts
If your car doesn’t start after following these steps, your battery may be weak and needs to be replaced. But don’t worry! There are a few things you can do to help improve its performance before you have to replace it.

First, make sure you charge your battery regularly. Incorporate charging into your daily routine, whether that means plugging in overnight or during lunchtime when you’re at work. This will give your battery enough juice to start up your car on cold days or when you’ve been sitting in traffic for hours.

Second, keep your car clean and free of dust and grime. This will help reduce corrosion from building up on your battery terminals over time.

Lastly, don’t Forget The Battery Cables! Keeping proper connection between the cables connecting the battery to the rest of the vehicle is essential for ensuring a strong power supply to your engine


If you have a lithium battery-powered device that is not charging or is not holding a charge, there are some basic steps that can be followed to reset it. This will help get your device back up and running as if nothing happened. If the problem is more severe, such as the device not turning on at all, then it may require a professional repair. However, following these simple steps should get you most of the way there.