Introduction
A 2.5 ton fan coil unit is a self-contained unit which includes the following:
The air handler
The heating, cooling and/or domestic hot water coil
An evaporator coil
A condenser coil
A compressor
A fan
In a 2.5 ton fan coil unit, a cooling tower is installed to provide fresh water for the condenser and make sure it is kept clean. The coolant from the condenser flows through this cooling tower which has large cooling fins like those found on an automobile radiator. This helps remove heat from the coolant before it goes back into the air handler as room temperature air.”
2.5 ton fan coil unit is a self-contained unit which includes the following:
The 2.5 ton fan coil unit is a self-contained unit which includes the following:
- The air handler is the component that provides air to the unit. It can be located in either horizontal or vertical position.
- The heating, cooling and/or domestic hot water coil is the component that provides heat to the unit. It can also be located in either horizontal or vertical position depending on its design and application requirements
- An evaporator coil is where condensed water vapor collects after passing through an evaporator core (usually made up of aluminum fins) where it’s heated by hot gases flowing through an insulated central ductwork called a plenum chamber before being discharged back into room space through diffuser nozzles mounted above floorspace grilles
The air handler
The air handler is the heart of any fan coil unit. It contains all of the components that make up your cooling system, including:
- The coolant pump – This is what moves the refrigerant through your unit. It’s an electric motor that pumps liquid through hoses and coils to keep everything cool.
- The condenser coil – This part cools down hot air from inside your home by transferring heat into water vapor in liquid form (which then exits through drain pipes). When it’s working well, it should feel cold when you touch it!
The compressor pumps out hot air from inside your house into this part of the system so that it can be cooled down before being sent back into rooms as cold air again.
The heating, cooling and/or domestic hot water coil
A 2.5 ton fan coil unit is a device that uses cooling or heating coils to transfer heat from one place to another. The coil is usually made of copper, which has good thermal conductivity and can be wrapped with insulation for better efficiency. A fan coil unit also contains an enclosure that protects the water inside from getting too hot or cold (depending on your needs).
An evaporator coil
An evaporator coil is a heat exchanger that cools the air by using refrigerant. The refrigerant absorbs heat from the air and passes it to the condenser, where it is heated. The hot gaseous refrigerant then passes through a compressor and is compressed into a high-pressure liquid state. This causes its temperature to drop dramatically, which makes it possible for us to use this process as an air conditioner or heat pump (depending on whether we want colder temperatures or warmer ones).
A condenser coil
The condenser coil is located in the cooling tower. It’s used to cool the refrigerant, and it can be cooled by water from the cooling tower or by air. The condenser coil is located on the outside of your building, so that it can receive fresh air for better cooling efficiency.
A compressor
The compressor is a machine that increases the pressure of a gas. It does this by decreasing its volume and increasing its density, through the application of heat energy.
Compressors can be powered by electric motors, steam turbines or internal combustion engines. They are used to compress air or any other gas for refrigeration systems, pneumatic tools, air conditioning equipment and motor vehicle air brakes (1935 – present).
A fan
A fan is installed to provide air circulation. It’s used to cool the air before it is blown into the building. The fan can be controlled by a timer or a thermostat, depending on your needs and preferences.
In a 2.5 ton fan coil unit, a cooling tower is installed to provide fresh water for the condenser and make sure it is kept clean.
In a 2.5 ton fan coil unit, a cooling tower is installed to provide fresh water for the condenser and make sure it is kept clean. The cooling tower removes heat from air that has been cooled and dehumidified by an evaporator coil in your split system air conditioner (such as an indoor unit or furnace).
The main benefit of a cooling tower is that it doesn’t use any electricity to operate–it’s powered entirely by gravity-fed water flow through the system. This makes it much more efficient than traditional refrigeration methods like absorption chillers or compressors, which require significant amounts of energy consumption in order to produce cold temperatures on demand at low cost per BTU output ratio compared with other types of industrial processes such as chemical manufacturing plants or food processing plants where these systems are commonly used today.”
Conclusion
So, if you are looking for a 2.5 ton fan coil unit, then you can contact us at ACI. We will guide you through the process of buying this product and provide detailed information about its various features.