What is a Split Unit Heater?

If you’ve ever been curious about what a split unit heater is and how it works, this article is for you. Most people are familiar with traditional central heating units that use ducts to distribute hot air throughout the home. But split unit heaters offer an alternative solution that can be more energy efficient and cost-effective. In this blog post, we will discuss what a split unit heater is, how it works, and why it might be the right choice for your home. Plus, we’ll cover some of the key features to look for when shopping for one. Let’s dive in!

What is a split unit heater?

A split unit heater, also known as a ductless mini-split, is a heating and cooling system that does not require ductwork. This type of system consists of an outdoor compressor/condenser and one or more indoor air handlers. The indoor air handlers can be mounted on the wall or ceiling, and they are connected to the outdoor unit by refrigerant lines.

Split unit heaters are becoming increasingly popular because they are energy efficient and easy to install. In addition, split unit heaters provide zoning capabilities, which means that you can control the temperature in different areas of your home independently.

How does a split unit heater work?

A split unit heater is a type of heating system that uses separate indoor and outdoor units. The outdoor unit contains the compressor, while the indoor unit houses the evaporator. A split unit heater works by circulating refrigerant between the two units. When the refrigerant reaches the outdoor unit, it is compressed, causing it to heat up. The hot refrigerant then flows into the indoor unit, where it evaporates and absorbs heat from the surrounding air. This process continues until the desired temperature is reached.

Benefits of a split unit heater

There are plenty of reasons to choose a split unit heater for your home. Here are some of the top benefits:

1. Cost savings – Split unit heaters are very energy efficient, so you’ll save money on your energy bills each month.

2. Space saving – These heaters don’t take up a lot of space, so they’re perfect for small homes or apartments.

3. Easy installation – You can usually install a split unit heater yourself without having to hire a professional.

4. Safe and clean – Split unit heaters don’t produce any harmful emissions, so they’re safe for your family and the environment.

Drawbacks of a split unit heater

There are a few potential drawbacks to using a split unit heater. First, because the unit is installed outside, it can be noisy. Additionally, the unit may not be as efficient as some other types of heaters, and it may not work well in very cold weather. Finally, the unit can be difficult to install, so it’s important to make sure you have a qualified technician do the job.

How to choose the right size split unit heater

When choosing a split unit heater, it is important to consider the size of the space that needs to be heated. Split unit heaters are available in a range of sizes, so it is important to choose one that will be able to effectively heat the space. If the space is too large for the chosen split unit heater, it will not be able to effectively heat the space and could result in an uncomfortable environment.

How to install a split unit heater

A split unit heater is a type of heating system that is installed in two separate parts: an indoor unit and an outdoor unit. The indoor unit is usually mounted on the wall or ceiling, and the outdoor unit is typically installed on the ground. Split unit heaters are most commonly used in homes and businesses with more than one room, as they allow each room to be heated independently.

Installing a split unit heater can be a bit tricky, but it’s definitely doable if you’re handy and have some basic knowledge of home electrical systems. Here’s a quick rundown of what you’ll need to do:

1. Start by turning off the power to the area where you’ll be working. This is important for safety reasons, so don’t skip this step!

2. Next, remove the old heater (if there is one) and disconnect any electrical wires that are attached to it.

3. Now it’s time to install the new indoor unit. Mount it on the wall or ceiling according to the manufacturer’s instructions, then connect the electrical wires to their respective terminals.

4. The outdoor unit needs to be installed next. Typically, this involves placing it on a concrete pad or similar level surface. Again, follow the manufacturer’s instructions for proper installation.

5. Finally, turn the power back on and test your new split unit heater to make sure it’s working properly!

Conclusion

In conclusion, a split unit heater is an excellent choice for those looking to heat their home without having to rely on traditional central heating systems. Not only are they less expensive than other types of heating systems, but they also offer flexibility and convenience with the ability to install them in different locations throughout your home. They have become increasingly popular over time as people realize just how much more efficient and cost-effective these units can be compared to conventional heating solutions. So if you’re tired of shelling out too much money each month on energy bills and want to find a way to keep your home heated at an affordable rate, then a split unit heater may be the perfect solution for you!