What is a Split Unit System?
Have you heard of split unit systems, but aren’t sure exactly what they are? A split unit system is a type of air conditioning system that separates the condenser, compressor and evaporator coils into multiple units. This allows for better energy efficiency and cost savings, as well as easier access to repairs. In this blog post, we’ll take a closer look at split unit systems and explain how they work.
What is a Split Unit System?
A split unit system is a type of heating and cooling system that is common in many homes. The system consists of two parts: an outdoor unit, which contains the compressor, and an indoor unit, which contains the evaporator. The two units are connected by a set of refrigerant lines.
The split unit system is a very efficient way to heat and cool your home, as it does not require any ductwork. The indoor and outdoor units can be placed in different areas of the home, so you can customize the temperature in each room. Additionally, split unit systems are very quiet, making them ideal for bedrooms and other areas where you want to avoid noise.
How does a Split Unit System work?
A split unit system is a type of central air conditioning system that uses two separate units: an outdoor unit that contains the compressor, condenser, and expansion valve, and an indoor unit that contains the evaporator coil. The two units are connected by refrigerant lines.
The outdoor unit pumps refrigerant to the indoor unit, where it enters the evaporator coil. The refrigerant absorbs heat from the air passing over the coil, causing it to evaporate. The now-hot refrigerant gas is then sent back to the outdoor unit, where it enters the compressor. The compressor squeezes the gas, raising its temperature even further.
The hot gas then enters the condenser, where it releases its heat to the outside air passing over the coils. The cooled gas is then routed back to the indoor unit to start the cycle over again.
What are the benefits of a Split Unit System?
A split unit system is an air conditioner that is composed of two parts: an outdoor compressor/condenser and an indoor air handler. The outdoor unit contains the condenser, which removes heat from the refrigerant, and the compressor, which circulates the refrigerant. The indoor air handler contains the evaporator coil, which absorbs heat from the indoor air.
The main benefit of a split unit system is that it is very efficient at cooling your home. The split design allows the compressor and condenser to be located outside where it is cooler, while the evaporator coil is located inside where it is warmer. This means that less energy is required to cool your home, and you will save money on your energy bills. In addition, a split unit system is very quiet since the noisy components are located outside.
Are there any drawbacks to a Split Unit System?
There are a few drawbacks to a split unit system. One is that the units can be quite loud when they first start up. Another is that they can be difficult to install if you are not familiar with HVAC systems. Finally, split unit systems can be more expensive to operate than other types of heating and cooling systems.
How much does a Split Unit System cost?
In short, a split unit system cost anywhere from $600 to $2,500. The price will depend on the brand, size, and cooling capacity you need. Some brands that we recommend are LG, Daikin, and Mitsubishi. If you need help finding the perfect split unit system for your home or office, please contact us and we’d be happy to assist you.
How do I install a Split Unit System?
Installing a split unit system is not as difficult as it may seem. In most cases, it is a fairly simple process that can be completed in a few hours. Here are the basic steps to follow when installing a split unit system:
1. Choose the location for the indoor and outdoor units. The indoor unit should be installed in an area that is protected from the elements, such as a garage or utility room. The outdoor unit should be installed in a location that allows for proper airflow and ventilation.
2. Connect the indoor and outdoor units using refrigerant lines. These lines must be properly insulated to prevent heat loss.
3. Install the condenser coils in the outdoor unit. Make sure that these coils are level so that they can drain properly.
4. Install the evaporator coils in the indoor unit. Again, make sure that these coils are level to prevent problems with drainage.
5. Connect the electrical power supply to both units. Make sure all connections are tight and secure to prevent any potential hazards.
Conclusion
Split unit systems offer a great way to heat and cool your home. These systems are efficient, cost-effective, easy to install and maintain, and can be customized for any size room or space in the home. They have many advantages over traditional HVAC systems, but it is important to make sure that you choose one that fits your needs. With proper research and installation of a split system air conditioner in your home, you will be able to enjoy year round comfort without breaking the bank.
